Furniture and Storage guide
Assemble flat-pack furniture
Check every component, build on a protected level surface and secure tall furniture against tipping.
- Difficulty
- beginner
- Time
- One hour to a day, depending on the item
- Safety level
- Standard checks
This guide is a starting point, not a survey of your home. Check the actual surface, hidden services, product instructions and local requirements before work. Stop when a safety condition or professional checkpoint applies.
Materials
- The complete furniture pack and manufacturer-supplied hardware
- Manufacturer-approved wall restraint and verified wall fixings for tall or unstable items
- Floor protection and small parts containers
Tools
- The exact hand tools listed in the instructions
- Low-torque driver only if the maker permits it
- Tape measure, square and level
- Detector and fixing tools only for an approved wall restraint
Preparation
- Read the full instructions and confirm the product has no active safety recall.
- Count and identify every part before assembly.
- Protect a clear, level floor area large enough to turn the item safely.
- Arrange a second person for large panels, lifting and standing the item up.
Safety
- Do not substitute fixings, alter parts or use power tools where the instructions prohibit them.
- Secure tall, climbable or drawer-front-heavy furniture using the specified restraint and a fixing suited to the verified wall.
- Keep small parts, bags and tools away from children and pets.
Steps
Inventory the pack
Match panels, fixings and fittings to the parts page and set aside anything damaged or missing.
Set the orientation
Identify front, back, finished faces and hole patterns before inserting any hardware.
Follow the maker's sequence
Complete one numbered stage at a time and keep connectors loose until the instruction says to tighten.
Square and tighten
Check diagonals or back-panel alignment, then tighten by hand without crushing the board.
Position and restrain
Lift with help, level the item and install the specified anti-tip restraint into a confirmed safe fixing point.
Safety checkpoint: Do not use tall or unstable furniture until its required restraint is safely installed.
Professional checkpoints
- Use a competent installer if the item is exceptionally large, must be wall-hung or the safe restraint point is uncertain.
Visual guidance
Level: helpful · Format: reference-diagram
The maker's diagrams should be the primary visual; a parts layout can help before assembly begins.
Illustration brief (conceptual only): Arrange labelled parts and fixings in the same orientation and numbering used in the manufacturer's instructions.
Explore other guides
See every guide or describe your own project in the interactive planner.